SAFETY PRECAUTIONS

Before using this product, please read and save the enclosed warnings and safety instructions.

	WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect operation. If water or other foreign objects enter the inside of the device, fire or electric shock may result. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
	CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation. Never disassemble or modify the device, as failures may result. Do not subject to extreme force and do not pull on the cable or failures may result. Keep the microphone dry and avoid exposure to extreme temperatures and humidity.

Features

DSP That Brings Sound to Life

The MV6 features ensure you always get professional sound without needing any audio experience. Adjust settings and features in the MOTIV Mix™ app. These features are turned on by default, so you can unbox, plug in, and go:

• Auto Level Mode: With our state-of-the-art Auto Level Mode, your MV6 intelligently adjusts microphone gain in real-time based on your distance from the microphone and volume level for consistent sound at all times. Whether you’re in the heat of an intense gaming session or quietly chatting with your followers on stream, the MV6 guarantees perfect audio levels at all times.
• Digital Popper Stopper™: Inspired by our acclaimed MV7+, the Digital Popper Stopper™ technology effectively eliminates harsh plosive sounds, delivering clear, distraction-free audio without needing a physical pop filter.
• Real-time Denoiser: Our intelligent DSP technology within the MV6 removes unwanted background noise, from humming fans to whirring air conditioners to ensure only your voice is captured and nothing else.
• Voice Isolation Technology: The MV6's combination of dynamic capsule and cardioid pick up pattern ensures that the microphone doesn't capture any unwanted background or room noise for crystal-clear audio every time.

Tap-to-mute Button

Privacy at your fingertips. The MV6's tap-to-mute button offers immediate control, allowing you to mute your microphone instantly whenever you need a moment of silence.

USB-C and 3.5 mm Headphone Output

The MV6 is designed for modern setups, featuring a USB-C output for instant connection to any computer, phone, or tablet and a 3.5 mm output for real-time headphone monitoring. Configure your monitor mix in the MOTIV Mix™ app to balance what you hear in your headphones between computer audio and microphone playback.

Everything Included

The MV6 comes with everything you need to start your audio journey, including a sturdy round base desktop stand and a 1 m USB-C cable. Get connected and start creating instantly.

Quick Setup with MOTIV Mix

1. Use the USB-C cable to plug the microphone into your computer.

   The LED panel on the MV6 will pulse when the connection is made.

2. Download MOTIV Mix at http://www.shure.com/MOTIVMix.

   Your computer may request permission to use the external device the first time the app is opened.

3. Select your microphone from the Sources panel.

   Access customized controls for your MOTIV microphone via the settings gear icon in MOTIV Mix.

Mic Setup in MOTIV Mix

MOTIV Mix enables you to change the settings on your MV6 to match your application perfectly. Auto Level mode automatically adjusts gain in the moment for clear, quality output. Auto Level mode is the default setting on MV6. For a more detailed control of settings, Manual mode allows you to customize settings to fit your specific application.

• Mute/Unmute Mute and unmute the MV6 in MOTIV Mix. The MV6 can also be muted or unmuted by touching the mute button.
• Disable Mute Button When Disable  Mute  Button is active, the physical mute control on the microphone is disabled. Mute can still be controlled through the app. Mute doesn't persist through a power cycle and will turn off when the mic restarts or is unplugged and plugged back in.
• Firmware Update When a new firmware update is available, select the Firmware Update Available button to update the device.
• Gain Auto level mode automatically adjusts gain applied to the microphone. Manual mode gives full control over the microphone gain. Use the slider to adjust microphone gain in Manual mode.
• Monitor Mix Move the sliders to adjust the levels of mic and PC sound sources in the headphones connected to the device.
• Tone Adjust the tone of the MV6 between Dark, Natural, and Bright by moving the slider.
• Real-time Denoiser Enable or disable the Real-time Denoiser DSP to help reduce unwanted noise.
• Digital Popper Stopper™ Enable or disable the Popper Stopper DSP to detect and reduce plosives.
• High Pass Filter Reduce unwanted low-frequency rumbling noise with a high pass filter at 75 Hz or 150 Hz.
• Reset to Defaults Select Reset to Defaults to reset your device to factory settings. This will remove all changes you have made to the device.

Auto Level Mode, Real-time Denoiser, and the Digital Popper Stopper are optimized for speech. When using the MV6 for other applications, like singing or playing a musical instrument, disable Auto Level Mode, Real-time Denoiser, and the Digital Popper Stopper for the best recording.

LED Behavior

Pulses amber: Powering on. The MV6 is connecting to the computer, phone, or tablet.

Turns green USB-C connection success. On successful connection to the computer, phone, or tablet, the mute button will turn green.

Continues pulsing amber: USB-C connection failure. If the microphone is unable to connect to the computer, phone, or tablet, the mute button will continue to pulse amber. Unplug the microphone and plug back in.

Turns red: MV6 is muted. When the device is muted, the mute button will turn red.

Flashes amber quickly: Firmware update. While the microphone firmware is updating, the LED panel quickly flashes amber. Keep the microphone connected until the firmware update is complete.

Flashes amber and green: Identify. When the device is identified from MOTIV Mix, the mute button will flash amber and green.

Flashes red continuously: Error. The mute button will flash red when an error occurs.

Keep equipment connected during updates

Keep your MOTIV device connected to your computer or mobile device when updating to ensure that there are no update issues.

System Requirements and Compatibility: Mac

• MacOS 12 and higher
• Minimum 8 GB of RAM
• Minimum 20% of hard disk space

System Requirements and Compatibility: Windows

• Windows 10 and higher
• Minimum 8 GB of RAM
• Minimum 20% of hard disk space

System Requirements and Compatibility: iOS

• iOS: iOS 16 and higher

System Requirements and Compatibility: Android

Will work with any Android device that has:

• Android 12.0 (Snow Cone) and higher
• USB Audio Class 2.0 support and higher
• Bluetooth 5.0 and higher

Android is a trademark of Google Inc.

Note: See the compatibility tab on product pages for information on recommended Android devices. MoveMic One, MoveMic Two, MoveMic Two Receiver Kit and MoveMic Receiver.

Furnished Accessories

Replacement Parts

Information to the user

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception.

Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance.

This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.

Environmental Regulatory Information

Waste Electrical and Electronic Equipment (WEEE) Directive

In the European Union and the United Kingdom, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.